Usage
The APOLO Pro warm air and radiation heaters are ideal for heating and supplementary heating in residential areas, guesthouses, restaurants, halls, club rooms, leisure facilities, as well as workshops, storage rooms, and businesses. These heaters can burn wood and wood briquettes.
Captivating View
With their elegant design and fully glazed doors, these heaters offer an uninterrupted view of the roaring fire. They become a modern centerpiece in your home and are also suitable for larger spaces that need to be efficiently heated.
Ingenious Design
The sophisticated design of the APOLO Pro heaters features side pipes and two warm air heat exchangers, complemented by a radial fan for blowing hot air. This setup, combined with the secondary combustion system, ensures very high efficiency.
Inside the outer heat exchanger is a wiper element that allows for easy cleaning of the heat exchange surfaces. The wiper is operated via a lever, making it simple to clean and ensuring the heat exchanger’s proper function and maximum efficiency.
Another advantage of this design is the rapid heat distribution. Just a few minutes after ignition, warm air is blown out and distributed throughout the heated space. The fan is strategically placed at the lower rear part of the heater to prevent damage from hot oven surfaces in case of a power outage.
Perfect Combustion
The heaters are equipped with a secondary combustion system that ensures complete combustion. This results in low emissions and up to 40% less fuel consumption compared to conventional heaters of similar performance.
Even Heating
The warm air heat exchangers extract the maximum amount of heat from the exhaust gases, significantly reducing heating costs. Additionally, the APOLO Pro heaters provide even heat distribution throughout the space, mixing warm and cold air efficiently.
Additional Information
The heater’s performance can be easily adjusted via the primary air supply using an adjustable damper in the door. The secondary air is factory-set for optimal performance.
The combustion chamber is lined with heat-resistant fire bricks, which maintain high temperatures in the chamber and enable complete combustion. These bricks also protect the internal metal parts of the combustion chamber, significantly extending the heater’s lifespan.
An optional control unit can be purchased to regulate the fan speed for blowing hot air from the heater. The unit can operate in manual or automatic mode. In automatic mode, which is factory-set, the fan speed is adjusted based on the current heater performance (temperature).
Key Benefits of the APOLO Pro Warm Air Heaters
- Complies with emission standards EN 13240, I.BlmSchV_Stufe2, 15a B-VG, Ecodesign2022
- Made from strong, heat-resistant materials
- High efficiency
- Patented triple heat exchange system
- Low wood consumption (up to 40%)
- Cleanable warm air heat exchanger
- Radial pressure fan
- Stainless steel heat air ducts for secondary air
- Long burn time
- Easy control of primary air supply
- Combustion chamber lined with fire-resistant bricks (long lifespan)
- Automatic transformer control of fan speed (optional)
- Corrosion-resistant combustion system
Technical Specifications
| Rated Power | 14 kW |
|---|---|
| Heating Power | 6 – 14 kW |
| Heated Volume | 100-350 m³ |
| Fuel Consumption | 2,9 kg/h |
| Efficiency Class | A+ |
| Efficiency | 83,1 % |
| CO Emissions at O2=13% | 0,0729 % |
| Max. Fuel Quantity | 4 kg/h |
| Heated Air Volume | 100 – 500 m³/h |
| Constant Output Temperature | 50 – 110 °C |
| Fan Power | 62 – 110 W |
| Exhaust Gas Temperature | 203 oC |
| Flue Pipe Diameter | 150 mm |
| Chimney Draft | 12 Pa |
| Max. Log Length | 420 mm |
| Breite | 610mm |
| Höhe: | 1 040 mm |
| Gewicht | 158 kg |
