Usage
The APOLO Pro warm air and radiant stove is designed for heating and warming residential spaces, guesthouses, restaurants, halls, club rooms, recreational facilities, as well as workshops, storage rooms, businesses, and other areas.
Wood or wood briquettes can be burned in these stoves.
Captivating View
The elegant design, combined with fully glazed doors, allows an uninterrupted view of the flickering flames. This stove becomes a modern focal point in your home and is also suitable for larger rooms that need efficient heating.
Thoughtful Construction
The sophisticated design of the APOLO Pro stove, with side pipes and two warm air heat exchangers, complemented by a radial fan for blowing out hot air, ensures very high efficiency when combined with the secondary combustion system.
Inside the outer heat exchanger, there is a cleaning mechanism that makes it easy to clean the heat transfer surfaces of the exchanger. The cleaner is operated with a pull cord, allowing the heat exchanger to be easily cleaned, ensuring proper function and maximum efficiency.
Another advantage of this design is the rapid heat development. Within minutes after lighting, warm air is blown out and distributed throughout the heated room. The fan is strategically positioned at the lower rear of the stove to prevent damage from the hot stove casing in case of a power failure.
Perfect Combustion
The stove is equipped with a secondary combustion system that enables perfect combustion. As a result, the stove produces low emissions and has up to 40% lower fuel consumption compared to conventional stoves of similar performance.
Even Heating
The warm air heat exchangers extract the maximum amount of heat from the exhaust gases, significantly reducing overall heating costs. Another advantage of the APOLO Pro is the even distribution of heat throughout the heated room, ensuring a rapid and uniform mixing of warm and cold air in the stove’s surroundings.
Additional Information
The stove’s performance can be easily adjusted by controlling the primary air supply via an adjustable flap in the door. The secondary air supply is optimally set at the factory to match the stove’s performance.
The combustion chamber is lined with heat-resistant refractory bricks that maintain high temperatures in the chamber and ensure perfect combustion. These bricks also protect the internal metal parts of the combustion chamber, guaranteeing a long service life of the stove.
An optional control unit can be purchased to regulate the fan speed for blowing out hot air. The unit can be set to manual or automatic mode. In automatic mode, the fan speed is adjusted according to the current stove performance (temperature).
Key Features of the APOLO Pro Warm Air Stove
- Meets emission standards EN 13240, I.BlmSchV_Stufe2, 15a B-VG, Ecodesign2022
- Made from strong, heat-resistant materials
- High efficiency
- Patented triple heat transfer system
- Low wood consumption (up to 40%)
- Cleanable warm air heat exchanger
- Radial pressure fan
- Stainless steel heat-resistant secondary air ducts
- Long burn time
- Easy control of primary air supply
- Combustion chamber lined with refractory bricks (long life)
- Automatic speed control (optional accessory)
- Rust-free combustion system
Technical Data
| Rated Power | 17,6 kW |
|---|---|
| Heat Output | 9 – 20 kW |
| Heated Volume | 150-450 m³ |
| Fuel Consumption | 4,4 kg/h |
| Efficiency Class | A+ |
| Efficiency | 83 % |
| CO Emission at O2=13% | 0,0682 % |
| Max. Fuel Quantity | 6 kg/h |
| Air Flow | 100 – 500 m³/h |
| Constant Outlet Temperature | 50 – 110 °C |
| Fan Power Consumption | 62 – 110 W |
| Exhaust Temperature | 219 °C |
| Pipe Diameter | 150 mm |
| Chimney Draft | 12 Pa |
| Max. Wood Length | 540 mm |
| Depth of Stove Body (with Fan) | 715 (910) mm |
| Width | 610mm |
| Height | 1 040 mm |
| Weight | 190 kg |
